Mactronic M-Fire Firefighter Flashlight

All Services

Firefighter clothing Firefighter Helmets Protective Footwear Special Protective Gloves Heat-reflective clothing (HRC) Firefighter Equipment Firefighter Casual Clothing Fire Hoses Breathing Apparatus Lighting Devices Foaming Agents and Fire Fighting Equipment Demining Equipment Сhemical and biological protection suits

Mactronic M-Fire Firefighter Flashlight

The body of the flashlight is made of impact and heat-resistant polymer, and the protective glass is made of shockproof polycarbonate with a special scratch-resistant coating. The fire-resistant shoulder strap allows for effective use in a fire zone. The proven CREE XP-G3 LED has a lifespan of more than 50,000 hours and creates a luminous flux of neutral white light that perfectly penetrates a layer of smoke or dust. The flashlight is powered by two 1960 mAh Li-Ion batteries and can operate for up to 82 hours without recharging. The flashlight is also equipped with a fire-resistant strap and a charging station that can be attached to the wall.

The flashlight generates a light beam of at least 222 lm (at 100% voltage) and can illuminate objects at a distance up to 432 m. Powered by high-capacity batteries, the flashlight can operate for up to 4 hours and 15 minutes in maximum power mode and an impressive 82 hours (over 3 days) in economy mode.

The flashlight has 3 operating modes: 100%, 50% і 10%. The power button is located on the front of the handle. When pressed, the 100% mode is activated. Switching modes is done by pressing the same button again.

The flashlight has all modern protective systems that prevent the flashlight from short circuits, overheating, mechanical damage or moisture ingress. The body is made of polymer and provides IP64 protection (protection against dust and water splashes from any direction) and impact resistance when dropped from a height of up to 1 m on concrete.
The flashlight is equipped with a fireproof shoulder strap and a charging station.

Technical specifications:

  • Luminous flux: 222 Lm (ANSI/PLATO FL 1-2016 standard);
  • Shade: neutral white;
  • Lighting distance: 432 m (ANSI/PLATO FL 1-2016 standard);
  • Impact resistance: up to 1 m when dropped on concrete (ANSI/PLATO FL 1-2016 Standard);
  • Water resistance: IPX4 (protection against water splashes from any direction) (ANSI/PLATO FL 1-2016 Standard);
  • Number of modes: 3;
  • Purpose: for use by employees of the Ministry of Emergency Situations, fire services and ambulance services;
  • Color: Red.

Design features:

  • LED: Cree™ XP-G3
  • Explosion-proof design
  • Flashlight control: button on the handle of the flashlight
  • Optical system: aluminum reflector, smooth
  • Body material: shock-resistant, heat-resistant polymer
  • Glass material: impact-resistant polycarbonate with anti-scratch coating
  • Fireproof shoulder strap
  • Charging station with wall mount

Compliance with standards and certificates:

EN 60079-0:2012/A11:2013
EN 60079-11:2012
EN 61000-28:2015

I M1
II 1G
Ex ia op is I Ma
Ex ia op is IIC T4 Ga

Suitable for use in rooms with the constant presence of explosive gas, in mines with the presence of methane and coal dust, intrinsically safe, explosion hazardous area class 0, temperature class T4 – withstands ambient temperatures up to 200 °C

Operating modes and duration:

  • 100% 222 Lm, 432 m – 4 h 15 min;
  • 50% 69 Lm, 270 m – 14 h;
  • 10% 11 Lm, 110 m – 82 h 10 min;

Power supply:

  • Li-Ion 3.7 V battery (2×1960 mAh);

Package contents:

  • Flashlight – 1 pc.
  • Fireproof shoulder strap – 1 pc
  • Charging station – 1 pc
  • Instructions.

Size and weight:

  • Size without packaging, mm: 256 x 170 x 136
  • Size in the package, mm: 295 x 180 x 145
  • Weight with battery, g 604
  • Weight in the package, g 1200