FHR 008 MAX PL/M Special Protective Suit for Firefighters

Meets the requirements:

  • Resolution of the CMU dated 21.08.2019 No. 771 “On approval of the Technical Regulations for Personal Protective Equipment”
  • NSU EN 469: 2017 “Protective clothing for firefighters. Requirements for quality indicators of protective clothing for firefighters” ((EN 469:2005+12006+AS:2006), IDT)
  • NSU EN ISO 13688:2016 (EN ISO 13688:2013, IDT; ISO 13688:2013, IDT) “Protective clothing. General requirements”.

Special protective clothing FHR 008 MAX PL/M – modernity, functionality, safety

  • Modern functional lightweight clothing.
  • Perfectly developed technical design.
  • Ergonomics and functionality ensure complete comfort during use.

It consists of the following layers:

  1. sand-colored outer fabric (75% meta-aramid, 23% para-aramid, 2% antistatic fibers),
  2. membrane: two-component ePTFE laminated with non-woven fabric (85% meta-aramid, 15% para-aramid),
  3. thermal insulation layer: non-woven fabric (85% meta-aramid, 15% para-aramid),
  4. quilted inner lining (50% aramid, 50% FR viscose).
  • Zipper with an emergency opening system (quick release).
  • Ergonomic cut, profiled in all layers.
  • The sleeves are trimmed with rubber with a thumbhole.
  • The bottom edges of the cuffs and legs are finished with 100% Kevlar® reinforcement. Additional 100% Kevlar® reinforcement at the elbows and knees to protect elbow and knee joints with pressure-absorbing inserts.
  • Regulated leg and sleeve cuffs.
  • On the back and shoulders, internal elements that absorb the pressure of straps for wearing a breathing apparatus.
  • Each pocket of the jacket has a carabiner and a loop for attaching small accessories.
  • Multifunctional pockets and clips for attaching, for example, a motion detector, flashlights, gloves, and radio phone.
  • Pocket flaps made of 100% Kevlar® provide easy access to pockets without removing gloves.
  • Perforated reflective and fluorescent tapes.
  • Velcro fasteners for attaching emblems and labels.

 

  • One-way zipper with emergency opening system (quick release type).
  • Functional zippered pockets.
  • Fasteners for gloves, flashlights, radio, etc.
  • Internal zippered pocket.
  • Elastic cuffs with thumbholes.
  • External cargo pockets.
  • Ergonomic cutout of the knee bend area of the reinforcement. The same cut is in the elbow bend area.
  • Regulated cuffs on the legs and sleeves.
  • Reinforcement on the elbows, cuffs and legs.
  • Velcro for attaching emblems and labels.
  • All seams are 100% aramid.
  • High-quality reflective tapes.