Calisia Vulcan Firefighter Helmet Type CV 103

All Services

Firefighter clothing Firefighter Helmets Protective Footwear Special Protective Gloves Heat-reflective clothing (HRC) Firefighter Equipment Firefighter Casual Clothing Fire Hoses Breathing Apparatus Lighting Devices Foaming Agents and Fire Fighting Equipment Demining Equipment Сhemical and biological protection suits

The Calisia Vulcan Firefighter Helmet Type CV 103 meets the requirements:

  • Technical Regulations for Personal Protective Equipment, Resolution of the CMU dated 21.08.2019 No. 771;
  • NSU EN 443:2017 Personal protective equipment for the head. Fire-fighting helmets (EN 443:2008, IDT);
  • NSU EN 16473:2017 Fire-fighting helmets. Helmets for technical rescue (EN 16473:2014, IDT);
  • NSU EN 14458:2019 Personal protective equipment for eyes. High-performance visors intended for use only with protective helmets (EN 14458:2018, IDT);

The helmet has a Declaration of Conformity of Personal Protective Equipment to the requirements of the Technical Regulations on Personal Protective Equipment. Module B+D. The helmet meets the requirements of the current sanitary legislation of Ukraine and has the Conclusion of the State Sanitary Expertise.

The helmet is designed in such a way as not to interfere with the wearing of a full-face mask. The materials used in the production of the helmet are non-toxic, and the parts in direct contact with the head skin do not cause pathological changes and are resistant to disinfectants. The helmet body is made of flame retardant PA 6.6 polyester and reinforced with glass fiber, which guarantees very high mechanical strength and thermal resistance.

After exposure to an open flame, the burning time of the shell is no more than 5 seconds and the helmet shell material does not drip off

The helmet protects against various chemicals. The helmet shell does not deform under the influence of water. There are no sparks when it hit metal objects. The helmet does not limit hearing during use.

The helmet is equipped with a system that allows you to change the size from 54 to 62 cm without removing the helmet off the head, has a convenient headband system, and provides comfortable wearing.

The helmet’s internal equipment is designed to maximize wearing comfort and efficiency.

The design of the face shield prevents its accidental detachment from the helmet shell and makes it possible to adjust the position with one hand.

The face shield in the lowered position fully protects the face of the firefighter or rescuer and provides good visibility.

The fitting of the helmet is provided by a system, which enables you to properly position the helmet on your head and reduces the load on your head.

The interior of the helmet is made of haberdashery leather, and comfort is enhanced by a Nomex lining, along with a leather cushion that protects the back of the head from abrasions and pressure.

The helmet shell, face shield, chin strap, and pelerine do not lose shape, color, or size when exposed to 200°C for 180 seconds.

The energy-absorbing system of the helmet is designed to provide resistance to vertical strikes with an energy of 80 joules; after the impact, the integrity of the internal equipment is preserved, with no cracks or dents forming on the shell surface.

The fastening of this system prevents its spontaneous or accidental detachment from the shell.

The chin strap is connected to the helmet shell in a way that ensures the most comfortable positioning under the chin during operation.

After being exposed to radiation heat with an intensity of 7 kW*m2, the helmet does not melt and no material drops appear.

Metal parts of the helmet are resistant to corrosion.

The weight is 1350 g.